The SHARPS free^™ SMS-100 is configured to remove needles of 1/2” to 1 1/2” lengths, 18-31 gauge, from syringes of volumes of .3cc—20cc. The product comes supplied with a rechargeable battery and UL approved AC powered recharging system.  The product is designed to be used with most standard syringes.

The product has FDA 510K clearance(K001853) and is patent protected in the US, Canada, UK, Europe and Hong Kong.

The SMS-100 allows for a one handed operation from the time the syringe/needle is used to the point of placing the used syringe/needle into the Product. The product is easy to use and little operator training is required. Additionally, no operator intervention is required during the processing of the syringes. The possibility of accidental needlestick injuries is almost completely eliminated. The needle cartridge is made of molded, puncture resistant ABS plastic and is automatically locked upon removal from the SMS-100. The fact that the needles are fully contained eliminates the risk for waste handlers who subsequently handle the “sharps” cartridge for disposal. The cost of biohazard waste disposal, for a Health Care provider, can be significantly reduced if the used syringe bodies, less the needles, are reclaimed or recycled. Additionally, the SMS-100 eliminates the possibility of secondary use of the syringe.

There are no sparks or fumes emitted during operation, therefore the SMS-100 is not “contra-indicated in a gaseous environment ” and is safe to use in any environment. The SMS-100 helps bring healthcare providers into compliance with the OSHA Bloodborne Pathogens Standard and the Needlestick Safety and Prevention Act of 2000, which requires any employer with one or more employees working in an environment where needlesticks may occur to take full advantage of new technologies that can reduce the chances of this hazard.

Mechanics of the Device

The SMS-100 has a series of LEDs to indicate the status of the device (Ready, Processing, Cartridge Full, Low battery). The SMS-100, through artificial intelligence, automatically begins processing the syringe after it is placed in the receiving opening. Once the syringe is positioned, the needle is gripped and completely extracted from the syringe and then deposited into a needle cartridge. The remaining syringe body can then be deposited into the syringe barrel disposal container to be discarded as regular waste or to be recycled.

The SMS-100 counts the number of processed syringes and at a count of 295 the device will signal, via a “blinking” red LED, that the needle cartridge is almost full. Upon reaching the “full” count of 300, a “steady” red LED will then signal that the cartridge is full and will need to be replaced before any further processing can take place. The SMS-100 automatically releases the needle cartridge for replacement once the cartridge is full. As the needle cartridge is removed, it is locked and sealed so that it can be disposed of safely. The SMS-100 comes complete with two needle cartridges, one for immediate use and one additional replacement needle cartridge for insertion when required. Additional replacement needle cartridges can be ordered from Sharpsfree, Inc. or its product dealer network for the life of the product.

General Specifications

SMS-100 Size: 6.87”L x 4.25” W x 6.87” H.

SMS-100 Weight: 2.5 lbs.

Battery Pack: Recyclable pack of 10, 1.5V AA Nickel Metal Hydride (NiMH) batteries. Total voltage 15V, 650 MAH. NiMH.

Wall Charger: (Inverter) Input 100-240V; 50-60 HZ; .3A.  Output: 17V, .07A ; Right angle mount.

Needle Cartridge: self locking, puncture resistant, leak proof ABS plastic.

Needle Cartridge Size: 3.66”L x 2.75”H x 2.06 W.

Needle Cartridge Capacity: 300 needles from .5” to 1.5”.